Our machine is running many processes that require a lot of CPU memory. These procedures may occasionally cause applications and software to crash, and computers may even perform slowly.
These procedures don’t appear detrimental on the surface, and to be honest, most of the time, it’s a flaw in them that causes problems.
IAStorDataSvc is one such process, and it’s not necessarily bad in and of itself. Even so, it can occasionally harm your CPU utilization. Therefore, it’s important to take the appropriate steps to either disable IAStorDataSvc or take other actions, which we’ll cover in this article.
What is 32-bit IAStoreDataSvc?
IAStoreDataSvc, a term used by Intel Rapid Storage Technology, can be translated as Intel Data Service. Thanks to it, you can access your regularly used programs more quickly.
Sometimes, this process uses 60% to 85% of the CPU. Despite being otherwise designed to improve computer performance, it makes your machine’s performance worse due to this CPU consumption.
IAStorDataSvc may have outdated firmware or be infected if it uses more CPU.
How Can I Reduce IAStoreDataSvc’s Excessive CPU Usage?
When IAStoreDataSvc starts using more CPU resources, it’s time to tighten controls. Here are various methods for doing so.
Using the Control Panel, remove Intel Rapid Storage Technology
You can remove Intel Rapid Storage Technology from the Control Panel now that we know it can be the cause of the IAStorDataSvc high CPU issue.
- Open the Control Panel by typing it in the Windows search box.
- Then select Programs and Features.
- Choose Intel Rapid Storage Technology from the list of available applications.
- Click the Uninstall button in the top right corner.
But what if you run into a circumstance where your Control Panel is malfunctioning or not functioning at all? Do not fret! We have you covered.
The quickest way to resolve the problem
IAStorDataSvc High CPU consumption may occur if you unintentionally installed the incorrect Intel driver or if your computer is infected with malware or a virus.
A program like Advanced System Optimizer can be very beneficial in both circumstances. You may check for out-of-date drivers and scan for malware and other dangers using its two modules. Here’s how to use Advanced System Optimizer to resolve IAStorDataSvc’s high CPU usage:
Reinstall dated drivers
- Install Advanced System Optimizer after downloading it.
- Select Windows Optimizers in the left-hand pane by clicking it.
- Click Driver Updater on the right side of the screen.
- At the bottom, click the Start Scan Now link.
- In the bottom right corner of the screen, under Updated Selected Drivers, you can select a certain driver.
Run a virus check
Select Security & Privacy from the left-hand window.
- Click on the System Protector button
- Click Start Scan Now when the System Protector window appears.
- System Protector will now scan your computer for viruses, malware, and other threats.
- After detection, select Clean All.
Using the Task Manager, terminate the process
If the IAStorDataSvc process is taking a lot of CPU power and other resources, you can choose to terminate it using the task manager. Nevertheless, this might just be a short-term fix. To stop the IAStorDataSvc process using the Task Manager, follow these steps:
- Ctrl + Shift + Escape to exit.
- Select the Processes tab when the Task Manager appears.
- The Intel Rapid Storage Technology process should be sought out. In the CPU pane, you can also observe that it consumes a lot of CPU.
- Choose End Task in the lower right corner after clicking on the process.
Removing IAStorDataSvc from Services
IASStorDataSVC can result in significant CPU utilization, which can lead to overheating issues. The services in Windows 10 can be used to disable IAStorDataSvc. To do this, take the following actions:
- By hitting Windows + R, the Run dialog box will appear.
- Enter services.msc
- Double-click on this choice after searching for Intel Rapid Storage Technology in the provided list of services.
- Put Disabled as the Startup type.
- Click OK after selecting Apply.
Install the most up-to-date Intel rapid storage technology
Corrupt Intel Rapid Storage Technology drivers can occasionally cause IAStorDataSVC to utilize a lot of CPU.
To install the driver, you can use Advanced System Optimizer, or you can manually install the most recent driver to fix the problem. The steps for accomplishing the same thing are listed below:
- Search for the most recent Intel Rapid Storage Technology driver at the Intel download center.
- Click Download next to SetupRST.exe.
- After downloading SetupRST.exe, double-click it and adhere to the on-screen directions.
- Select the Yes, restart this computer checkbox.
- Select Finish.
Update Windows
Your Windows computer’s overall performance can be enhanced by updating Windows. Even IAStorDataSvc’s high CPU utilization issue, which may have contributed to overheating problems, might be fixed during this process. The steps to upgrade Windows are as follows:
- Hold down the Windows key and click Settings.
- Click Update & Security after you’ve scrolled down.
- Click on Windows Update in the left-hand window.
- On the right side, click the Check For Updates button.
High CPU utilization might greatly affect your system’s performance, and as we have shown above, IAStorDataSvc may be one of the causes. We hope that using the methods listed above, you can either disable the service or get rid of it.
Q&A
Is it possible to turn off IAStorDataSvc?
If IAStorDataSvc seems to be using a lot of CPU power, you can disable it. You can accomplish this by utilizing Windows’ service manager feature. Use the run command to launch Services. MSC to accomplish this. For a comprehensive process, consult the stages in the blog.
Why does IAStorDataSvc use a lot of CPU resources?
As stated at the beginning, IAStorDataSvc builds the cache index and allows you faster access to your frequently used programs. This process uses a lot of CPU power, and it may also clear or upgrade the cache.
